add test subfolder

tests/testData/csst_fz_gc0/config_C6.yaml

+---
+###############################################
+#
+#  Configuration file for CSST simulation
+#  CSST-Sim Group, 2021/10/07
+#
+###############################################
+
+# Base diretories and naming setup
+# Can add some of the command-line arguments here as well;
+# OK to pass either way or both, as long as they are consistent
+work_dir: "/share/home/fangyuedong/test_psf_rot/csst-simulation/workplace/"
+# work_dir: "/share/"
+data_dir: "/share/simudata/CSSOSDataProductsSims/data/"
+run_name: "C6_photometry"
+
+# (Optional) a file of point list 
+# if you just want to run default pointing:
+# - pointing_dir: null
+# - pointing_file: null
+pointing_dir: "/share/simudata/CSSOSDataProductsSims/data/"
+# pointing_dir: "/share/home/fangyuedong/test_psf_rot/csst-simulation/workplace/"
+pointing_file: "pointing_radec_246.5_40.dat"
+
+# Whether to use MPI
+run_option:
+  use_mpi: YES
+  # NOTE: "n_threads" paramters is currently not used in the backend
+  # simulation codes. It should be implemented later in the web frontend
+  # in order to config the number of threads to request from NAOC cluster
+  n_threads: 80
+
+  # Output catalog only?
+  # If yes, no imaging simulation will run
+  out_cat_only: NO
+
+  # Only simulate stars?
+  star_only: NO
+
+  # Only simulate galaxies?
+  galaxy_only: NO
+
+###############################################
+# Observation setting
+###############################################
+obs_setting:
+
+  # Options for survey types:
+  # "Photometric": simulate photometric chips only
+  # "Spectroscopic": simulate slitless spectroscopic chips only
+  # "All": simulate full focal plane
+  survey_type: "Spectroscopic"
+  
+  # Exposure time [seconds]
+  exp_time: 150.
+
+  # Observation starting date & time
+  # (Subject to change)
+  date_obs: "210525" # [yymmdd]
+  time_obs: "120000" # [hhmmss]
+
+  # Default Pointing [degrees]
+  # Note: NOT valid when a pointing list file is specified
+  ra_center: 192.8595
+  dec_center:  27.1283
+
+  # Image rotation [degree]
+  image_rot: -113.4333
+
+  # Number of calibration pointings
+  np_cal: 0
+
+  # Run specific pointing(s):
+  # - give a list of indexes of pointings: [ip_1, ip_2...]
+  # - run all pointings: null
+  # Note: only valid when a pointing list is specified
+  run_pointings: null
+  
+  # Run specific chip(s):
+  # - give a list of indexes of chips: [ip_1, ip_2...]
+  # - run all chips: null
+  # Note: for all pointings
+  run_chips: null
+
+  # Whether to enable astrometric modeling
+  # astrometric_lib: "libshao.so"
+  enable_astrometric_model: True
+
+  # Cut by saturation magnitude in which band?
+  cut_in_band: "z"
+
+  # saturation magnitude margin
+  mag_sat_margin: -2.5
+
+  # limiting magnitude margin
+  mag_lim_margin: +1.0
+
+###############################################
+# Input path setting
+###############################################
+
+# Default path settings for WIDE survey simulation
+input_path:
+  cat_dir: "Catalog_C6_20221212"
+  star_cat: "C6_MMW_GGC_Astrometry_healpix.hdf5"
+  galaxy_cat: "cat2CSSTSim_bundle/"
+
+SED_templates_path:
+  star_SED: "Catalog_20210126/SpecLib.hdf5"
+  galaxy_SED: "Catalog_C6_20221212/sedlibs/"
+
+###############################################
+# PSF setting
+###############################################
+psf_setting:
+  
+  # Which PSF model to use:
+  # "Gauss": simple gaussian profile
+  # "Interp": Interpolated PSF from sampled ray-tracing data
+  psf_model: "Interp"
+
+  # PSF size [arcseconds]
+  # radius of 80% energy encircled
+  # NOTE: only valid for "Gauss" PSF
+  psf_rcont: 0.15
+
+  # path to PSF data
+  # NOTE: only valid for "Interp" PSF
+  psf_dir: "/share/simudata/CSSOSDataProductsSims/data/psfCube"
+
+  # path to field-distortion model
+  # Note: only valid when ins_effects: field_dist is "ON"
+  fd_path: "FieldDistModelGlobal_v1.0.pickle"
+  
+  # sigma_spin: 0.0 # psf spin?
+
+###############################################
+# Shear setting
+###############################################
+
+shear_setting:
+  # Options to generate mock shear field:
+  # "constant": all galaxies are assigned a constant reduced shear
+  # "catalog": from catalog
+  # "extra": from seprate file
+  shear_type: "catalog"
+
+  # For constant shear filed
+  reduced_g1: 0.
+  reduced_g2: 0.
+
+  # Representation of the shear vector?
+  reShear: "E"
+
+  # rotate galaxy ellipticity
+  rotateEll: 0. # [degree]
+
+  # Extra shear catalog
+  # (currently not used)
+  # shear_cat: "mockShear.cat"
+
+###############################################
+# Instrumental effects setting
+###############################################
+ins_effects:
+  # switches
+  field_dist:     ON  # Whether to add field distortions
+  add_back:       ON  # Whether to add sky background
+  add_dark:       ON  # Whether to add dark noise
+  add_readout:    ON  # Whether to add read-out (Gaussian) noise
+  add_bias:       ON  # Whether to add bias-level to images
+  bias_16channel: ON  # Whether to add different biases for 16 channels
+  gain_16channel: ON  # Whether to make different gains for 16 channels
+  shutter_effect: ON  # Whether to add shutter effect
+  flat_fielding:  ON  # Whether to add flat-fielding effect
+  prnu_effect:    ON  # Whether to add PRNU effect
+  non_linear:     ON  # Whether to add non-linearity
+  cosmic_ray:     ON  # Whether to add cosmic-ray
+  cray_differ:    ON  # Whether to generate different cosmic ray maps CAL and MS output
+  cte_trail:      ON  # Whether to simulate CTE trails
+  saturbloom:     ON  # Whether to simulate Saturation & Blooming
+  add_badcolumns: ON  # Whether to add bad columns
+  add_hotpixels:  ON  # Whether to add hot pixels
+  add_deadpixels: ON  # Whether to add dead(dark) pixels
+  bright_fatter:  ON  # Whether to simulate Brighter-Fatter (also diffusion) effect
+
+  # values
+  dark_exptime:   300   # Exposure time for dark current frames [seconds]
+  flat_exptime:   150   # Exposure time for flat-fielding frames [seconds]
+  readout_time:   40    # The read-out time for each channel [seconds]
+  df_strength:    2.3   # Sillicon sensor diffusion strength
+  bias_level:     500   # bias level [e-/pixel]
+  gain:           1.1   # Gain
+  full_well:      90000 # Full well depth [e-]
+  NBias:          1     # Number of bias frames to be exported for each exposure
+  NDark:          1     # Number of dark frames to be exported for each exposure
+  NFlat:          1     # Number of flat frames to be exported for each exposure
+
+###############################################
+# Output options
+###############################################
+output_setting:
+  readout16:      OFF # Whether to export as 16 channels (subimages) with pre- and over-scan
+  shutter_output: OFF # Whether to export shutter effect 16-bit image
+  bias_output:    ON  # Whether to export bias frames
+  dark_output:    ON  # Whether to export the combined dark current files
+  flat_output:    ON  # Whether to export the combined flat-fielding files
+  prnu_output:    OFF # Whether to export the PRNU (pixel-to-pixel flat-fielding) files
+
+###############################################
+# Random seeds
+###############################################
+random_seeds:
+  seed_Av:              121212    # Seed for generating random intrinsic extinction
+  seed_poisson:         20210601  # Seed for Poisson noise
+  seed_CR:              20210317  # Seed for generating random cosmic ray maps
+  seed_flat:            20210101  # Seed for generating random flat fields
+  seed_prnu:            20210102  # Seed for photo-response non-uniformity
+  seed_gainNonUniform:  20210202  # Seed for gain nonuniformity
+  seed_biasNonUniform:  20210203  # Seed for bias nonuniformity
+  seed_rnNonUniform:    20210204  # Seed for readout-noise nonuniformity
+  seed_badcolumns:      20240309  # Seed for bad columns
+  seed_defective:       20210304  # Seed for defective (bad) pixels
+  seed_readout:         20210601  # Seed for read-out gaussian noise
+...
\ No newline at end of file

tests/test_SpecDisperse.py

@@ -145,13 +145,17 @@ class TestSpecDisperse(unittest.TestCase):
     def __init__(self, methodName='runTest'):
         super(TestSpecDisperse,self).__init__(methodName)
 
-        self.conff= os.path.join(os.getenv('UNIT_TEST_DATA_ROOT'), 'CSST_GI2.conf')
-        self.throughputf= os.path.join(os.getenv('UNIT_TEST_DATA_ROOT'), 'GI.Throughput.1st.fits')
-        self.testDir = os.getenv('UNIT_TEST_DATA_ROOT')
-
+        self.filePath('csst_fz_gc0')
+        
         # self.conff = conff
         # self.throughputf = throughputf
 
+    def filePath(self, file_name):
+        fn = os.path.join(os.getenv('UNIT_TEST_DATA_ROOT'), file_name)
+        self.conff= os.path.join(fn, 'CSST_GI2.conf')
+        self.throughputf= os.path.join(fn, 'GI.Throughput.1st.fits')
+        self.testDir = fn
+
     def test_rotate901(self):
         m = np.array([[1,2,3,4,5],[6,7,8,9,10],[11,12,13,14,15],[16,17,18,19,20],[21,22,23,24,25]])
         m1 = np.array([[21,16,11,6,1],[22,17,12,7,2],[23,18,13,8,3],[24,19,14,9,4],[25,20,15,10,5]])

tests/test_Straylight.py

@@ -69,12 +69,18 @@ def calculateAnglePwithEarth(sat = np.array([0,0,0]), pointing = np.array([0,0,0
 
 class TestStraylight(unittest.TestCase):
 
-    def __init__(self, methodName='runTest', filter = 'i', grating = "GI"):
+    def __init__(self,methodName='runTest', filter = 'i', grating = "GI"):
         super(TestStraylight,self).__init__(methodName)
-        self.pointingData = np.loadtxt(os.path.join(os.getenv('UNIT_TEST_DATA_ROOT'), 'Straylight_test.dat'), dtype=np.double)
+        # print(file_name)
+        # fn = os.path.join(os.getenv('UNIT_TEST_DATA_ROOT'), file_name)
+        # self.pointingData = np.loadtxt(os.path.join(fn, 'Straylight_test.dat'), dtype=np.double)
+        self.filePath('csst_fz_gc0')
         self.filter = filter
         self.grating = grating
-
+        
+    def filePath(self, file_name):
+        fn = os.path.join(os.getenv('UNIT_TEST_DATA_ROOT'), file_name)
+        self.pointingData = np.loadtxt(os.path.join(fn, 'Straylight_test.dat'), dtype=np.double)
 
     def test_EarthShineFilter(self):
         d_sh = self.pointingData.shape