ltmain.sh

      # Allow error messages only from the first compilation.
      if test "$suppress_opt" = yes; then
        suppress_output=' >/dev/null 2>&1'
      fi
    else
      # No PIC object so indicate it doesn't exist in the libtool
      # object file.
      test -z "$run" && cat >> ${libobj}T <<EOF
pic_object=none

EOF
    fi

    # Only build a position-dependent object if we build old libraries.
    if test "$build_old_libs" = yes; then
      if test "$pic_mode" != yes; then
	# Don't build PIC code
	command="$base_compile $qsrcfile"
      else
	command="$base_compile $qsrcfile $pic_flag"
      fi
      if test "$compiler_c_o" = yes; then
	command="$command -o $obj"
      fi

      # Suppress compiler output if we already did a PIC compilation.
      command="$command$suppress_output"
      $run $rm "$obj" "$output_obj"
      $show "$command"
      if $run eval "$command"; then :
      else
	$run $rm $removelist
	exit $EXIT_FAILURE
      fi

      if test "$need_locks" = warn &&
	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
	$echo "\
*** ERROR, $lockfile contains:
`cat $lockfile 2>/dev/null`

but it should contain:
$srcfile

This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
your compiler does not support \`-c' and \`-o' together.  If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."

	$run $rm $removelist
	exit $EXIT_FAILURE
      fi

      # Just move the object if needed
      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
	$show "$mv $output_obj $obj"
	if $run $mv $output_obj $obj; then :
	else
	  error=$?
	  $run $rm $removelist
	  exit $error
	fi
      fi

      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object='$objname'

EOF
    else
      # Append the name of the non-PIC object the libtool object file.
      # Only append if the libtool object file exists.
      test -z "$run" && cat >> ${libobj}T <<EOF
# Name of the non-PIC object.
non_pic_object=none

EOF
    fi

    $run $mv "${libobj}T" "${libobj}"

    # Unlock the critical section if it was locked
    if test "$need_locks" != no; then
      $run $rm "$lockfile"
    fi

    exit $EXIT_SUCCESS
    ;;

  # libtool link mode
  link | relink)
    modename="$modename: link"
    case $host in
    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
      # It is impossible to link a dll without this setting, and
      # we shouldn't force the makefile maintainer to figure out
      # which system we are compiling for in order to pass an extra
      # flag for every libtool invocation.
      # allow_undefined=no

      # FIXME: Unfortunately, there are problems with the above when trying
      # to make a dll which has undefined symbols, in which case not
      # even a static library is built.  For now, we need to specify
      # -no-undefined on the libtool link line when we can be certain
      # that all symbols are satisfied, otherwise we get a static library.
      allow_undefined=yes
      ;;
    *)
      allow_undefined=yes
      ;;
    esac
    libtool_args="$nonopt"
    base_compile="$nonopt $@"
    compile_command="$nonopt"
    finalize_command="$nonopt"

    compile_rpath=
    finalize_rpath=
    compile_shlibpath=
    finalize_shlibpath=
    convenience=
    old_convenience=
    deplibs=
    old_deplibs=
    compiler_flags=
    linker_flags=
    dllsearchpath=
    lib_search_path=`pwd`
    inst_prefix_dir=

    avoid_version=no
    dlfiles=
    dlprefiles=
    dlself=no
    export_dynamic=no
    export_symbols=
    export_symbols_regex=
    generated=
    libobjs=
    ltlibs=
    module=no
    no_install=no
    objs=
    non_pic_objects=
    notinst_path= # paths that contain not-installed libtool libraries
    precious_files_regex=
    prefer_static_libs=no
    preload=no
    prev=
    prevarg=
    release=
    rpath=
    xrpath=
    perm_rpath=
    temp_rpath=
    thread_safe=no
    vinfo=
    vinfo_number=no

    func_infer_tag $base_compile

    # We need to know -static, to get the right output filenames.
    for arg
    do
      case $arg in
      -all-static | -static | -static-libtool-libs)
	case $arg in
	-all-static)
	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
	  fi
	  if test -n "$link_static_flag"; then
	    dlopen_self=$dlopen_self_static
	  fi
	  prefer_static_libs=yes
	  ;;
	-static)
	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
	    dlopen_self=$dlopen_self_static
	  fi
	  prefer_static_libs=built
	  ;;
	-static-libtool-libs)
	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
	    dlopen_self=$dlopen_self_static
	  fi
	  prefer_static_libs=yes
	  ;;
	esac
	build_libtool_libs=no
	build_old_libs=yes
	break
	;;
      esac
    done

    # See if our shared archives depend on static archives.
    test -n "$old_archive_from_new_cmds" && build_old_libs=yes

    # Go through the arguments, transforming them on the way.
    while test "$#" -gt 0; do
      arg="$1"
      shift
      case $arg in
      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
	;;
      *) qarg=$arg ;;
      esac
      libtool_args="$libtool_args $qarg"

      # If the previous option needs an argument, assign it.
      if test -n "$prev"; then
	case $prev in
	output)
	  compile_command="$compile_command @OUTPUT@"
	  finalize_command="$finalize_command @OUTPUT@"
	  ;;
	esac

	case $prev in
	dlfiles|dlprefiles)
	  if test "$preload" = no; then
	    # Add the symbol object into the linking commands.
	    compile_command="$compile_command @SYMFILE@"
	    finalize_command="$finalize_command @SYMFILE@"
	    preload=yes
	  fi
	  case $arg in
	  *.la | *.lo) ;;  # We handle these cases below.
	  force)
	    if test "$dlself" = no; then
	      dlself=needless
	      export_dynamic=yes
	    fi
	    prev=
	    continue
	    ;;
	  self)
	    if test "$prev" = dlprefiles; then
	      dlself=yes
	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
	      dlself=yes
	    else
	      dlself=needless
	      export_dynamic=yes
	    fi
	    prev=
	    continue
	    ;;
	  *)
	    if test "$prev" = dlfiles; then
	      dlfiles="$dlfiles $arg"
	    else
	      dlprefiles="$dlprefiles $arg"
	    fi
	    prev=
	    continue
	    ;;
	  esac
	  ;;
	expsyms)
	  export_symbols="$arg"
	  if test ! -f "$arg"; then
	    $echo "$modename: symbol file \`$arg' does not exist"
	    exit $EXIT_FAILURE
	  fi
	  prev=
	  continue
	  ;;
	expsyms_regex)
	  export_symbols_regex="$arg"
	  prev=
	  continue
	  ;;
	inst_prefix)
	  inst_prefix_dir="$arg"
	  prev=
	  continue
	  ;;
	precious_regex)
	  precious_files_regex="$arg"
	  prev=
	  continue
	  ;;
	release)
	  release="-$arg"
	  prev=
	  continue
	  ;;
	objectlist)
	  if test -f "$arg"; then
	    save_arg=$arg
	    moreargs=
	    for fil in `cat $save_arg`
	    do
#	      moreargs="$moreargs $fil"
	      arg=$fil
	      # A libtool-controlled object.

	      # Check to see that this really is a libtool object.
	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
		pic_object=
		non_pic_object=

		# Read the .lo file
		# If there is no directory component, then add one.
		case $arg in
		*/* | *\\*) . $arg ;;
		*) . ./$arg ;;
		esac

		if test -z "$pic_object" || \
		   test -z "$non_pic_object" ||
		   test "$pic_object" = none && \
		   test "$non_pic_object" = none; then
		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
		  exit $EXIT_FAILURE
		fi

		# Extract subdirectory from the argument.
		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
		if test "X$xdir" = "X$arg"; then
		  xdir=
		else
		  xdir="$xdir/"
		fi

		if test "$pic_object" != none; then
		  # Prepend the subdirectory the object is found in.
		  pic_object="$xdir$pic_object"

		  if test "$prev" = dlfiles; then
		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
		      dlfiles="$dlfiles $pic_object"
		      prev=
		      continue
		    else
		      # If libtool objects are unsupported, then we need to preload.
		      prev=dlprefiles
		    fi
		  fi

		  # CHECK ME:  I think I busted this.  -Ossama
		  if test "$prev" = dlprefiles; then
		    # Preload the old-style object.
		    dlprefiles="$dlprefiles $pic_object"
		    prev=
		  fi

		  # A PIC object.
		  libobjs="$libobjs $pic_object"
		  arg="$pic_object"
		fi

		# Non-PIC object.
		if test "$non_pic_object" != none; then
		  # Prepend the subdirectory the object is found in.
		  non_pic_object="$xdir$non_pic_object"

		  # A standard non-PIC object
		  non_pic_objects="$non_pic_objects $non_pic_object"
		  if test -z "$pic_object" || test "$pic_object" = none ; then
		    arg="$non_pic_object"
		  fi
		else
		  # If the PIC object exists, use it instead.
		  # $xdir was prepended to $pic_object above.
		  non_pic_object="$pic_object"
		  non_pic_objects="$non_pic_objects $non_pic_object"
		fi
	      else
		# Only an error if not doing a dry-run.
		if test -z "$run"; then
		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
		  exit $EXIT_FAILURE
		else
		  # Dry-run case.

		  # Extract subdirectory from the argument.
		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
		  if test "X$xdir" = "X$arg"; then
		    xdir=
		  else
		    xdir="$xdir/"
		  fi

		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
		  libobjs="$libobjs $pic_object"
		  non_pic_objects="$non_pic_objects $non_pic_object"
		fi
	      fi
	    done
	  else
	    $echo "$modename: link input file \`$save_arg' does not exist"
	    exit $EXIT_FAILURE
	  fi
	  arg=$save_arg
	  prev=
	  continue
	  ;;
	rpath | xrpath)
	  # We need an absolute path.
	  case $arg in
	  [\\/]* | [A-Za-z]:[\\/]*) ;;
	  *)
	    $echo "$modename: only absolute run-paths are allowed" 1>&2
	    exit $EXIT_FAILURE
	    ;;
	  esac
	  if test "$prev" = rpath; then
	    case "$rpath " in
	    *" $arg "*) ;;
	    *) rpath="$rpath $arg" ;;
	    esac
	  else
	    case "$xrpath " in
	    *" $arg "*) ;;
	    *) xrpath="$xrpath $arg" ;;
	    esac
	  fi
	  prev=
	  continue
	  ;;
	xcompiler)
	  compiler_flags="$compiler_flags $qarg"
	  prev=
	  compile_command="$compile_command $qarg"
	  finalize_command="$finalize_command $qarg"
	  continue
	  ;;
	xlinker)
	  linker_flags="$linker_flags $qarg"
	  compiler_flags="$compiler_flags $wl$qarg"
	  prev=
	  compile_command="$compile_command $wl$qarg"
	  finalize_command="$finalize_command $wl$qarg"
	  continue
	  ;;
	xcclinker)
	  linker_flags="$linker_flags $qarg"
	  compiler_flags="$compiler_flags $qarg"
	  prev=
	  compile_command="$compile_command $qarg"
	  finalize_command="$finalize_command $qarg"
	  continue
	  ;;
	shrext)
  	  shrext_cmds="$arg"
	  prev=
	  continue
	  ;;
	darwin_framework|darwin_framework_skip)
	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
	  compile_command="$compile_command $arg"
	  finalize_command="$finalize_command $arg"
	  prev=
	  continue
	  ;;
	*)
	  eval "$prev=\"\$arg\""
	  prev=
	  continue
	  ;;
	esac
      fi # test -n "$prev"

      prevarg="$arg"

      case $arg in
      -all-static)
	if test -n "$link_static_flag"; then
	  compile_command="$compile_command $link_static_flag"
	  finalize_command="$finalize_command $link_static_flag"
	fi
	continue
	;;

      -allow-undefined)
	# FIXME: remove this flag sometime in the future.
	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
	continue
	;;

      -avoid-version)
	avoid_version=yes
	continue
	;;

      -dlopen)
	prev=dlfiles
	continue
	;;

      -dlpreopen)
	prev=dlprefiles
	continue
	;;

      -export-dynamic)
	export_dynamic=yes
	continue
	;;

      -export-symbols | -export-symbols-regex)
	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
	  $echo "$modename: more than one -exported-symbols argument is not allowed"
	  exit $EXIT_FAILURE
	fi
	if test "X$arg" = "X-export-symbols"; then
	  prev=expsyms
	else
	  prev=expsyms_regex
	fi
	continue
	;;

      -framework|-arch|-isysroot)
	case " $CC " in
	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
		prev=darwin_framework_skip ;;
	  *) compiler_flags="$compiler_flags $arg"
	     prev=darwin_framework ;;
	esac
	compile_command="$compile_command $arg"
	finalize_command="$finalize_command $arg"
	continue
	;;

      -inst-prefix-dir)
	prev=inst_prefix
	continue
	;;

      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
      # so, if we see these flags be careful not to treat them like -L
      -L[A-Z][A-Z]*:*)
	case $with_gcc/$host in
	no/*-*-irix* | /*-*-irix*)
	  compile_command="$compile_command $arg"
	  finalize_command="$finalize_command $arg"
	  ;;
	esac
	continue
	;;

      -L*)
	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
	# We need an absolute path.
	case $dir in
	[\\/]* | [A-Za-z]:[\\/]*) ;;
	*)
	  absdir=`cd "$dir" && pwd`
	  if test -z "$absdir"; then
	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
	    absdir="$dir"
	    notinst_path="$notinst_path $dir"
	  fi
	  dir="$absdir"
	  ;;
	esac
	case "$deplibs " in
	*" -L$dir "*) ;;
	*)
	  deplibs="$deplibs -L$dir"
	  lib_search_path="$lib_search_path $dir"
	  ;;
	esac
	case $host in
	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
	  case :$dllsearchpath: in
	  *":$dir:"*) ;;
	  *) dllsearchpath="$dllsearchpath:$dir";;
	  esac
	  case :$dllsearchpath: in
	  *":$testbindir:"*) ;;
	  *) dllsearchpath="$dllsearchpath:$testbindir";;
	  esac
	  ;;
	esac
	continue
	;;

      -l*)
	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
	  case $host in
	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
	    # These systems don't actually have a C or math library (as such)
	    continue
	    ;;
	  *-*-os2*)
	    # These systems don't actually have a C library (as such)
	    test "X$arg" = "X-lc" && continue
	    ;;
	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
	    # Do not include libc due to us having libc/libc_r.
	    test "X$arg" = "X-lc" && continue
	    ;;
	  *-*-rhapsody* | *-*-darwin1.[012])
	    # Rhapsody C and math libraries are in the System framework
	    deplibs="$deplibs -framework System"
	    continue
	    ;;
	  *-*-sco3.2v5* | *-*-sco5v6*)
	    # Causes problems with __ctype
	    test "X$arg" = "X-lc" && continue
	    ;;
	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
	    # Compiler inserts libc in the correct place for threads to work
	    test "X$arg" = "X-lc" && continue
	    ;;
	  esac
	elif test "X$arg" = "X-lc_r"; then
	 case $host in
	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
	   # Do not include libc_r directly, use -pthread flag.
	   continue
	   ;;
	 esac
	fi
	deplibs="$deplibs $arg"
	continue
	;;

      # Tru64 UNIX uses -model [arg] to determine the layout of C++
      # classes, name mangling, and exception handling.
      -model)
	compile_command="$compile_command $arg"
	compiler_flags="$compiler_flags $arg"
	finalize_command="$finalize_command $arg"
	prev=xcompiler
	continue
	;;

     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
	compiler_flags="$compiler_flags $arg"
	compile_command="$compile_command $arg"
	finalize_command="$finalize_command $arg"
	continue
	;;

      -module)
	module=yes
	continue
	;;

      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
      # -r[0-9][0-9]* specifies the processor on the SGI compiler
      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
      # +DA*, +DD* enable 64-bit mode on the HP compiler
      # -q* pass through compiler args for the IBM compiler
      # -m* pass through architecture-specific compiler args for GCC
      # -m*, -t[45]*, -txscale* pass through architecture-specific
      # compiler args for GCC
      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
      # -F/path gives path to uninstalled frameworks, gcc on darwin
      # @file GCC response files
      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)

	# Unknown arguments in both finalize_command and compile_command need
	# to be aesthetically quoted because they are evaled later.
	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
	case $arg in
	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	  arg="\"$arg\""
	  ;;
	esac
        compile_command="$compile_command $arg"
        finalize_command="$finalize_command $arg"
        compiler_flags="$compiler_flags $arg"
        continue
        ;;

      -shrext)
	prev=shrext
	continue
	;;

      -no-fast-install)
	fast_install=no
	continue
	;;

      -no-install)
	case $host in
	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
	  # The PATH hackery in wrapper scripts is required on Windows
	  # and Darwin in order for the loader to find any dlls it needs.
	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
	  fast_install=no
	  ;;
	*) no_install=yes ;;
	esac
	continue
	;;

      -no-undefined)
	allow_undefined=no
	continue
	;;

      -objectlist)
	prev=objectlist
	continue
	;;

      -o) prev=output ;;

      -precious-files-regex)
	prev=precious_regex
	continue
	;;

      -release)
	prev=release
	continue
	;;

      -rpath)
	prev=rpath
	continue
	;;

      -R)
	prev=xrpath
	continue
	;;

      -R*)
	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
	# We need an absolute path.
	case $dir in
	[\\/]* | [A-Za-z]:[\\/]*) ;;
	*)
	  $echo "$modename: only absolute run-paths are allowed" 1>&2
	  exit $EXIT_FAILURE
	  ;;
	esac
	case "$xrpath " in
	*" $dir "*) ;;
	*) xrpath="$xrpath $dir" ;;
	esac
	continue
	;;

      -static | -static-libtool-libs)
	# The effects of -static are defined in a previous loop.
	# We used to do the same as -all-static on platforms that
	# didn't have a PIC flag, but the assumption that the effects
	# would be equivalent was wrong.  It would break on at least
	# Digital Unix and AIX.
	continue
	;;

      -thread-safe)
	thread_safe=yes
	continue
	;;

      -version-info)
	prev=vinfo
	continue
	;;
      -version-number)
	prev=vinfo
	vinfo_number=yes
	continue
	;;

      -Wc,*)
	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
	arg=
	save_ifs="$IFS"; IFS=','
	for flag in $args; do
	  IFS="$save_ifs"
	  case $flag in
	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	    flag="\"$flag\""
	    ;;
	  esac
	  arg="$arg $wl$flag"
	  compiler_flags="$compiler_flags $flag"
	done
	IFS="$save_ifs"
	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
	;;

      -Wl,*)
	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
	arg=
	save_ifs="$IFS"; IFS=','
	for flag in $args; do
	  IFS="$save_ifs"
	  case $flag in
	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	    flag="\"$flag\""
	    ;;
	  esac
	  arg="$arg $wl$flag"
	  compiler_flags="$compiler_flags $wl$flag"
	  linker_flags="$linker_flags $flag"
	done
	IFS="$save_ifs"
	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
	;;

      -Xcompiler)
	prev=xcompiler
	continue
	;;

      -Xlinker)
	prev=xlinker
	continue
	;;

      -XCClinker)
	prev=xcclinker
	continue
	;;

      # Some other compiler flag.
      -* | +*)
	# Unknown arguments in both finalize_command and compile_command need
	# to be aesthetically quoted because they are evaled later.
	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
	case $arg in
	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	  arg="\"$arg\""
	  ;;
	esac
	;;

      *.$objext)
	# A standard object.
	objs="$objs $arg"
	;;

      *.lo)
	# A libtool-controlled object.

	# Check to see that this really is a libtool object.
	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
	  pic_object=
	  non_pic_object=

	  # Read the .lo file
	  # If there is no directory component, then add one.
	  case $arg in
	  */* | *\\*) . $arg ;;
	  *) . ./$arg ;;
	  esac

	  if test -z "$pic_object" || \
	     test -z "$non_pic_object" ||
	     test "$pic_object" = none && \
	     test "$non_pic_object" = none; then
	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
	    exit $EXIT_FAILURE
	  fi

	  # Extract subdirectory from the argument.
	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
	  if test "X$xdir" = "X$arg"; then
	    xdir=
 	  else
	    xdir="$xdir/"
	  fi

	  if test "$pic_object" != none; then
	    # Prepend the subdirectory the object is found in.
	    pic_object="$xdir$pic_object"

	    if test "$prev" = dlfiles; then
	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
		dlfiles="$dlfiles $pic_object"
		prev=
		continue
	      else
		# If libtool objects are unsupported, then we need to preload.
		prev=dlprefiles
	      fi
	    fi

	    # CHECK ME:  I think I busted this.  -Ossama
	    if test "$prev" = dlprefiles; then
	      # Preload the old-style object.
	      dlprefiles="$dlprefiles $pic_object"
	      prev=
	    fi

	    # A PIC object.
	    libobjs="$libobjs $pic_object"
	    arg="$pic_object"
	  fi

	  # Non-PIC object.
	  if test "$non_pic_object" != none; then
	    # Prepend the subdirectory the object is found in.
	    non_pic_object="$xdir$non_pic_object"

	    # A standard non-PIC object
	    non_pic_objects="$non_pic_objects $non_pic_object"
	    if test -z "$pic_object" || test "$pic_object" = none ; then
	      arg="$non_pic_object"
	    fi
	  else
	    # If the PIC object exists, use it instead.
	    # $xdir was prepended to $pic_object above.
	    non_pic_object="$pic_object"
	    non_pic_objects="$non_pic_objects $non_pic_object"
	  fi
	else
	  # Only an error if not doing a dry-run.
	  if test -z "$run"; then
	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
	    exit $EXIT_FAILURE
	  else
	    # Dry-run case.

	    # Extract subdirectory from the argument.
	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
	    if test "X$xdir" = "X$arg"; then
	      xdir=
	    else
	      xdir="$xdir/"
	    fi

	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
	    libobjs="$libobjs $pic_object"
	    non_pic_objects="$non_pic_objects $non_pic_object"
	  fi
	fi
	;;

      *.$libext)
	# An archive.
	deplibs="$deplibs $arg"
	old_deplibs="$old_deplibs $arg"
	continue
	;;

      *.la)
	# A libtool-controlled library.

	if test "$prev" = dlfiles; then
	  # This library was specified with -dlopen.
	  dlfiles="$dlfiles $arg"
	  prev=
	elif test "$prev" = dlprefiles; then
	  # The library was specified with -dlpreopen.
	  dlprefiles="$dlprefiles $arg"
	  prev=
	else
	  deplibs="$deplibs $arg"
	fi
	continue
	;;

      # Some other compiler argument.
      *)
	# Unknown arguments in both finalize_command and compile_command need
	# to be aesthetically quoted because they are evaled later.
	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
	case $arg in
	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
	  arg="\"$arg\""
	  ;;
	esac
	;;
      esac # arg

      # Now actually substitute the argument into the commands.
      if test -n "$arg"; then
	compile_command="$compile_command $arg"
	finalize_command="$finalize_command $arg"
      fi
    done # argument parsing loop

    if test -n "$prev"; then
      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
      $echo "$help" 1>&2
      exit $EXIT_FAILURE
    fi

    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
      eval arg=\"$export_dynamic_flag_spec\"
      compile_command="$compile_command $arg"
      finalize_command="$finalize_command $arg"
    fi