change in config

config/config_C6_dev.yaml

@@ -9,9 +9,9 @@
 # Base diretories and naming setup
 # Can add some of the command-line arguments here as well;
 # OK to pass either way or both, as long as they are consistent
-work_dir: "/Users/zhangxin/Work/SlitlessSim/CSST_SIM/CSST_new_sim/csst-simulation/"
-data_dir: "/Volumes/EAGET/C6_data/inputData/"
-run_name: "C6_new_sim_2sq_run1"
+work_dir: "/share/home/fangyuedong/20231211/workplace/"
+data_dir: "/share/simudata/CSSOSDataProductsSims/data/"
+run_name: "test_C6_dev"
 project_cycle: 6
 run_counter: 1
 
@@ -67,15 +67,15 @@ obs_setting:
   # "FGS": simulate FGS chips only (31-42)
   # "All": simulate full focal plane
   # "CALIBRATION": falt, bias, dark with or without postflash
-  survey_type: "CALIBRATION"
-  #"LED": ['LED1','LED2','LED3','LED4','LED5','LED6','LED7','LED8','LED9','LED10','LED11','LED12','LED13','LED14'] or null
-  #'LED1': '275', 'LED2': '310', 'LED3': '430', 'LED4': '505', 'LED5': '545', 'LED6': '590', 'LED7': '670',
-  #'LED8': '760', 'LED9': '940', 'LED10': '940', 'LED11': '1050', 'LED12': '1050','LED13': '340', 'LED14': '365'
-  LED_TYPE: ['LED5']
-  LED_TIME: [1.]
-  # unit e- ,flat level
-  FLAT_LEVEL: 20000
-  FLAT_LEVEL_FIL: 'g'
+  survey_type: "Photometric"
+  # "LED": ['LED1','LED2','LED3','LED4','LED5','LED6','LED7','LED8','LED9','LED10','LED11','LED12','LED13','LED14'] or null
+  # 'LED1': '275', 'LED2': '310', 'LED3': '430', 'LED4': '505', 'LED5': '545', 'LED6': '590', 'LED7': '670',
+  # 'LED8': '760', 'LED9': '940', 'LED10': '940', 'LED11': '1050', 'LED12': '1050','LED13': '340', 'LED14': '365'
+  # LED_TYPE: ['LED5']
+  # LED_TIME: [1.]
+  # # unit e- ,flat level
+  # FLAT_LEVEL: 20000
+  # FLAT_LEVEL_FIL: 'g'
   
   # Exposure time [seconds]
   exp_time: 150.
@@ -95,11 +95,11 @@ obs_setting:
   # if you just want to run default pointing:
   # - pointing_dir: null
   # - pointing_file: null
-  pointing_dir: "/Volumes/EAGET/C6_data/inputData/"
+  pointing_dir: "/share/simudata/CSSOSDataProductsSims/data/"
   pointing_file: "pointing_radec_246.5_40.dat"
 
   # Number of calibration pointings
-  np_cal: 0
+  np_cal: 1
 
   # Run specific pointing(s):
   # - give a list of indexes of pointings: [ip_1, ip_2...]
@@ -111,10 +111,10 @@ obs_setting:
   # - give a list of indexes of chips: [ip_1, ip_2...]
   # - run all chips: null
   # Note: for all pointings
-  run_chips: [5]
+  run_chips: [8]
 
   # Whether to enable astrometric modeling
-  enable_astrometric_model: False
+  enable_astrometric_model: True
 
   # Whether to enable straylight model
   enable_straylight_model: True
@@ -137,7 +137,7 @@ psf_setting:
   # Which PSF model to use:
   # "Gauss": simple gaussian profile
   # "Interp": Interpolated PSF from sampled ray-tracing data
-  psf_model: "Gauss"
+  psf_model: "Interp"
 
   # PSF size [arcseconds]
   # radius of 80% energy encircled
@@ -169,7 +169,7 @@ ins_effects:
   # switches
   # Note: bias_16channel, gain_16channel, and shutter_effect
   # is currently not applicable to "FGS" observations
-  field_dist:     NO  # Whether to add field distortions
+  field_dist:     YES  # Whether to add field distortions
   add_back:       YES  # Whether to add sky background
   add_dark:       YES  # Whether to add dark noise
   add_readout:    YES  # Whether to add read-out (Gaussian) noise

test_C6.sh

@@ -2,8 +2,8 @@
 
 date
 
-python3 /share/home/fangyuedong/sim_v2/csst-simulation/run_sim.py \
-    --config_file config_C6.yaml \
+python3 /share/home/fangyuedong/20231211/csst-simulation/run_sim.py \
+    --config_file config_C6_dev.yaml \
     --catalog C6_Catalog \
-    -c /share/home/fangyuedong/sim_v2/csst-simulation/config
+    -c /share/home/fangyuedong/20231211/csst-simulation/config